| | เครื่องทดสอบเบรค ยี่ห้อ : Cosber รุ่น : KZD-3 Brake Tester | | | | KZD Vehicle Brake Tester is roller counter-force type tester which inspecting the braking performance of vehicle. Vehicle parks on the rollers set, which is driven by electric motor; it will run automatically to drive the wheels. Resistance Force will be obtained before brake applied. When driver applying the brake, brake force come from vehicle wheels will pass to the Gear Via a Chain connecting the Gear and roller. Force Sensor will detect the brake force via the Gear Lever which connecting the sensor and the Gear. The sensor will then transfer the force into electronic signal and send to computer. The computer will analyze the signal and display the inspection result on the Monitor/Display Board. Specification:
>Corundum binding roller set for high adhesion in both dry and wet condition
>High precision sensor ensures the exactitude of inspection result
>Using of reinforced steel, strengthen and durable structure body
>High performance motor and gearbox
>Electronic subordinate roller(sensor roller) and speed sensor
>Automatic start and anti-peel tyre program >Roller driven sort-out program (Air-lifter system available)
>Standard RS-232 interface connection KZD-3 Brake Tester Technical data: Item | Parameter | Max Axle Load(kg) | 4000 | Max. Inspection Axle Load(kg) | 3000 | Measurement Range(N) | 0-12500 | Roller Diameter(mm) | Φ200 | Adhesion coefficient of Roller | 0.9 dry, 0.8 wet | Roller Length(mm) | 700 | Roller Rotation Speed | 58 r/min (2.5km/h) | Roller Axle Separation(mm) | 381 | Wheel Diameter(mm) | ≥ 500 | Equipment Dimensions(mm) | 2390×725×375 | Equipment Weight(kg) | 580 | Motor Power(kW) | 2.2×2 | Power Supply | 3phase 380V, 50 Hz (Adjustable to 220V) | Application Temperature(℃) | 0-40 | Application Humidity | ≤90% |
| | | | | | | | เครื่องทดศูนย์ล้อ ยี่ห้อ : Cosber รุ่น : KCH-3 Sideslip tester | | | | KCH Vehicle Sideslip Tester inspects the matching
between wheel camber and wheel toe while the
vehicle is driving straightaway. When the vehicle is
passing over the Sideslip Plate, the plate is pushed to
the left or the right depending on the wheel tracking.
Any deviation will be sent to computer by the
displacement sensor and appeared in sideslip volume
and sideslip direction. Specification:
>Sideslip plate & Protection frame integrative structure
>Sideslip plate locker with inner key
>No maintenance body design
>Galvanized plate surface for extra long service life
>High precision sensor to ensure the exactitude of
result
>Upper and lower dual bearing system makes smooth
movement
>Selection of synchronic or independent motion type
for different regulation requirement
>Over-load & over-value alarm function
>Standard RS-232 connection portKCH-3 Single plate Sideslip tester Technical data: | Item | Parameter | Frame | Single plate with release board | Max Wheel Load(kg) | 2000 | Measurement Range(m/km) | ± 15 | Sideslip Plate Dimensions(mm) | 500×700 | Equipment Dimensions(mm) | 1060×726×100 | | Equipment Weight(kg) | 110 | Power Supply | 12 V, DC |
| | | |  | |
|
